 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 2, November 2000
Install Additional Hardware
Determine the port assignments of the circuit packs to be added. If there are no available port slots in the processor cabinet for the C-LAN circuit pack, place it in an EPN cabinet port slot.
| Caution! | When adding or replacing any hardware, be sure to ground yourself against electrostatic discharge (ESD) by wearing a grounded wrist strap. |
| Note: | The TN799B circuit pack is hot-swappable, so you do not need to power down the carrier to install it. |
Insert the TN799B circuit pack into the port slot identified earlier.
|
|
|
|
|
|
|
|
|
|
| Copyright� 2000 Avaya Inc |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |