DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Bring the System Online

Change Customer Options

Return to Task List

The following features are part of the basic software package and do not need to be activated. They default to y (yes) on the Optional Features form.


Note: An init password is required to modify customer options. Contact your regional CSA for the password.

  1. At the command: prompt, enter the change system-parameters customer-options and press Enter. A display similar to Typical Customer-Options Form appears.

  2. Using the Customer Order, enable the optional features purchased by the customer (as shown by PEC codes on the Customer Order).

    3. In Release 8 systems, a separate screen offers ASAI capability groups for selection in cases where the ASAI interface has been enabled. Change this screen in the same manner as page 1 of the Optional Features screen.

  3. If duplicated system, set PNC Duplication to y.

  4. Log off and log back in as craft to effect the changes.

Typical Customer-Options Form

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.