DEFINITY Made Easy Tools
Issue 2, November 2000

Install and Wire Telephones

---

Install and Wire Telephones

The wiring procedures are the same for most of the DEFINITY ECS telephones and other equipment.

This task list provides wiring examples of similar installation procedures. These are examples only; actual wiring procedures may vary at each site.

After installing the hardware, the data for telephone features must be administered. These procedures are provided in the current DEFINITY Enterprise Communications Server Administator's Guide.

Task List: Wiring Examples and Wiring Procedures

• Voice and Data Terminals


• Analog Tie Trunk Example


• Digital Tie Trunk Example


• DS1 Tie Trunk Example


• Auxiliary Connector Outputs


• Three-Pair and Four-Pair Modularity


• Adjunct Power Connection Locations


• Attendant Console Example


• Connect External Alarm Indicators and Auxiliary Power


• Connect Power Distribution Unit External Alarm Wires


• Remote Network Interface


• Off-Premises or Out-of-Building Stations


• Emergency Transfer Units and Associated Telephones


• 808A Emergency Transfer Panel and Telephone Installation Examples


• Install External Ringing


• Install the Queue Warning Indicator

These links provide useful reference information:

• Voice and Data Terminals


• Circuit Pack and Auxiliary Equipment Classifications


• Connector and Cable Diagrams (Pinout Charts)

---

Copyright� 2000 Avaya Inc

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.