DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Install and Wire Telephones

Digital Tie Trunk Example

Return to Task List

This example shows how to connect digital tie trunk wiring from one DEFINITY System to another DEFINITY System. Digital Tie Trunk Wiring shows the connections.

  1. Install cross-connect jumpers to connect the pins from the digital trunk circuit pack to appropriate pins on the manufacturer's or supplier's external digital trunk.

  2. Set option switches on the port circuit pack (Digital Trunk).

    3. Go to Option Switch Settings for detailed information.

  3. Administer on the DS1 and Trunk Group Screens of the management terminal. See DEFINITY Enterprise Communications Server Release 8 Administrator's Guide for more details.

Digital Tie Trunk Wiring

Figure Notes:
      1. External Trunk

      2. Digital Trunk Circuit Pack, Position 1C06

      3. LO

      4. LO (Balanced Output Pair)

      5. LI

      6. LI (Balanced Input Pair)

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.