DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Option Switch Settings

Set DCS Switches

Return to Task List

  1. Remove the top cover from the data module. See DIP Switch Locations.

  2. Switches 1, 5, and 8 are the only switches to be set. Refer to Data Module Option Switch Settings for the option switch settings


Note: The options for the 7400A and 7400C Data Modules are set from the front panel interface. For the 7400A, refer to 7400A Data Module User's Manual, 555-020-706. For the 7400C, refer to DEFINITY Communications System High Speed Link User's Guide, 555-020-711.

DIP Switch Locations

Figure Notes:
      1. Data Module (7400A Shown)

      2. DIP Switch

.

Data Module Option Switch Settings
DIP Switch
Function
Setting

1

With Phone
Without Phone

ON
OFF

5

Data Metering
No Data Metering

ON
OFF

8

Make Busy on Loc Loop
No Make Busy on Loc Loop

ON
OFF

2, 3, 4, 6, and 7

 

OFF

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.