Add IP Solutions
Avaya offers several IP solutions for customers, 2 of which are Avaya R300 Remote Office Communicator and the IP Media Prodessor. For information on the Avaya R300, refer to the documentation on the CD or with the Avaya R300 equipment.
DEFINITY ECS IP Media Processor allows you to send voice and fax from the DEFINITY ECS through an Internet protocol (IP) network to other DEFINITY ECSs having this feature or to other H.323 V2 compliant endpoints. It is implemented using either the TN802B IP Interface Assembly, which is a Windows NT server residing on the IP Interface Assembly (Release 8.1 or later software), or the TN2302AP Media Processor (Release 8.3 or later software).
Both the TN802B and the TN2302AP work on all 3 DEFINITY ECS platforms (r, si, csi) and DEFINITY ONE.
Task List: Implementing DEFINITY ECS IP Solutions
DEFINITY ECS IP Solutions are implemented in these ways:
TN802B IP Interface Assembly
The IP Interface is an assembly composed of a TN802B circuit board, a processor card, and DSP resource card. For ordering purposes, the assembly is identified as a J58890MA-1 L30, but for simplicity, we refer to it in this section as the TN802B IP Interface.
The TN802B IP Interface operates in two modes: IP Trunk, available with Release 7 or later, and Media Processor (MedPro), available with Release 8. The IP Trunk mode is Internet Telephone Server--Enterprise (ITS-E) compatible, and the MedPro mode is H.323 V2 compatible. The TN802B IP Interface is backwards compatible and defaults to IP Trunk mode. You must administer it to use it in MedPro mode.
TN2302AP Media Processor
Unlike the TN802B IP Interface Assembly, the TN2302AP operates in one mode: Media Processor (MedPro), which is H.323 V2 compatible.
For more information on the IP Solutions capabilities and limitations, refer to the
DEFINITY Enterprise Communications Server Release 8 Overview.
