DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Install and Connect Modems

Add External Modem to TN1648B

Return to Task List

Use a type-approved external modem.

  1. Unpack and inspect the equipment received. See External Modem Pass-Thru Kit Equipment for the parts and Parts List for a list of part comcodes . Actual equipment may vary in appearance and may ship in separate packages.

  2. Open the front door.


Note: Administration may be required before removing the circuit pack in the following step.

  1. Determine which slot will contain the new circuit pack. Remove the circuit pack or the apparatus blank from this slot.

  2. Install the new circuit pack.

  3. From the front, remove the fan cover. See Remove the Fan Cover.

  4. Open the rear door.

  5. Attach the panel adapter bracket. See Attach the Panel Adapter Bracket.

  6. Insert the cable assembly. See Attach the Cable Assembly to the Bracket.

  7. Connect the external modem cable to the cable assembly.

  8. Attach the RJ45 (telephone plug) to the pass-thru tool using a tie wrap. See Attach the Cable to the Pass-Thru Tool. If you are using only one RJ45, bundle the other one and tie wrap it near the body of the cable assembly.

  9. Slide the tool to the front of the cabinet. See Insert the Pass-thru Tool.

  10. Pull the tool (with adapter and cable attached) out through the front of the cabinet.

  11. Close the rear door.

  12. Replace the fan cover. See Replace the Fan Cover.

  13. Connect the cable to the front of the TN1648B circuit pack. See Connect the Cable to the TN1648B Circuit Pack.

  14. Dress the cable straight down the front of the circuit pack. Do not allow the cable to cross in front of another circuit pack.

  15. Attach the cable mount to the cabinet and secure the cable. See Connect the Cable to the TN1648B Circuit Pack.

  16. Close the front door.

  17. Discard the pass-thru tool.

  18. Log in as craft.

  19. Administer the system by referring to the Installation and Test for Adjuncts and Peripherals.

  20. Type list configuration all and press Enter to determine if the new circuit pack appears in the correct slot and that there are no circuit pack conflicts.

External Modem Pass-Thru Kit Equipment

Figure Notes:
      1. Pass-thru Tool

      2. Machine Screw

      3. Cable Tie

      4. Panel Adapter Bracket

      5. Cable Assembly

      6. Cable Tie Mount

Parts List
Quantity
Description
Comcode

1

External modem pass-thru kit

Kit includes: pass-thru tool, cable ties, panel adapter bracket, machine screws, and cable tie mounts.

848239596

1

Cable Assembly

H600-497

Remove the Fan Cover

Attach the Panel Adapter Bracket

Attach the Cable Assembly to the Bracket

Attach the Cable to the Pass-Thru Tool

Figure Notes:
      1. Pass-thru Tool

      2. RJ45 (Telephone Plug)

      3. Tie Wrap

Insert the Pass-thru Tool

Replace the Fan Cover

Connect the Cable to the TN1648B Circuit Pack

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.