DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3rV2/3/4 and R5/6/7/8r to R9r

Reconfigure the Tape (G3rV2, V3 R31.0 and Earlier) [R9r]

Return to Task List


Note: Do not issue the list configuration software command before reconfiguring the removable media.


Note: For some software loads, use 3-mem instead of large

Standard reliability:

Type configure tape large and press Enter to reconfigure the backup removable media for the 2 (or 3) TN1650B Memory circuit packs.

This command takes about 1 minute to complete.

High or critical reliability:

  1. Type configure tape spe-a large and press Enter to reconfigure the removable media in control carrier A for 2 (or 3) TN1650B Memory circuit packs.

    2. This command takes about 1 minute to complete.

  2. Type configure tape spe-b large and press Enter to reconfigure the removable media in control carrier B for 2 (or 3) TN1650B Memory circuit packs.

    3. This command takes about 1 minute to complete.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.