DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3vs/R5vs/R6vs to R9si (On-Site)

Verify system status [G3vs, R5vs, R6vs to R9si]

Return to Task List

  1. Verify that system status is normal.

    2. Execute status system [option] (If status is not normal, take the needed corrective actions.)

  2. Verify that the system is alarm-free.

    3. Execute display alarms (If the system is not alarm-free, take the needed corrective actions.)

  3. Identify and record customer-placed busy-outs.

    4. Execute display errors (Examine the error log and record the error 18s that identify the busy-outs placed by the customer.)


Note: You will restore the customer-placed busy-outs after you have upgraded the system.

  1. For a system that has existing BX.25 links that are being retained after the upgrade: identify and record them.

    2. Execute display communication links

  2. Execute the following commands and verify that the information is correct:

    3. list stations

    list trunks

    list hunt groups

    list data

    For upgrades from systems later than G1, list ars analysis

    For a system with Expert Agent later than G3V3, list agent

    If any command does not complete successfully, escalate the problem immediately.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.