DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3vs/R5vs/R6vs to R9si (On-Site)

Disable TTI [G3vs, R5vs, R6vs to R9si]

Return to Task List


Caution! If you do not disable the TTI, the translations can be corrupted.

  1. Type change system-parameters features and press Enter.

  2. On page 2 of the form, set the TTI Enable? field to n to de-activate the TTI feature.

  3. Type status tti and press Enter. Confirm that the TTI is completely disabled before you proceed with the upgrade.

    4. TTI is completely disabled when the Percent Complete field shows 100.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.