DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3vs/R5vs/R6vs to R9si (On-Site)

Remove ground connections [G3vs, R5vs, R6vs to R9si]

Return to Task List

  1. Remove the 6 AWG (#40) (16-mm 2) ground wire from the ground block on the rear of the G3vs system.

    2. This wire later attaches to the new control cabinet.

  2. Remove the 10 AWG (#25) (6-mm 2) coupled bonding conductor (CBC) wire from the ground block on the rear of the G3vs system.

    3. This wire later attaches to the new control cabinet.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.