DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3vs/R5vs/R6vs to R9si (On-Site)

Save announcements and translation [G3vs, R5vs, R6vs to R9si]

Return to Task List

  1. Remove the original translation card(s) from the TN2401 NetPkt circuit packs. These cards are not formatted to be used with the new TN2401.

  2. Insert the new translation card(s) into the TN2401 circuit packs.

  3. Type save announcements and press Enter.

    4. This takes about 45 minutes.


Note: It takes longer to save translations to the new, larger flashcards.

  1. Type save translation and press Enter to copy upgraded translations in memory to the new translation card, which takes about 20 minutes.


Note: Do not press any keyboard key until after the screen displays the success message. For example, if you press Enter more than once after typing the command, the second Enter erases the screen and you never see the success message.


Note: If the save translation command fails, do not continue. Record the error code that appears on the screen and escalate the problem immediately.

Keep the translation media in a safe and secure place.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.