DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC



TN1648B

The TN1648 is an SPE component used for maintenance. A processor in the TN1648 runs control routines that connect to maintenance software. The TN1648 has a 5-LED alarm panel and a toggle switch to manually inhibit automatic emergency transfer of PPN analog lines.

The TN1648 provides 2 RS-232 interfaces for connection to an administration terminal and, with duplication, connection to a standby maintenance terminal. The TN1648 also provides a tip and ring port with a built-in modem allowing a remote administration terminal to access the system.

The circuit pack allows connection to the management terminal and connection to and termination of 1 end of the processor bus. Other maintenance items include:

The TN1648B increases the internal and external modem speeds from 2400 bps to 9600 bps with error control implementation. Appropriate software administration is added to choose between external modem access to the maintenance port, and direct loop start trunk access. The former is used in countries that do not support the analog loop signaling protocol supplied by the internal modem.

A cable from the TN1648B connects directly to an external modem. When the external modem is selected, the internal modem is disabled. The TN1648B is backward-compatible with the TN1648.


DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.