Changing Remote User Data Manually

Running a remote update can use one of your networking ports for quite some time. If you want to change a remote user immediately but do not want to run a remote update, you can change that user manually.

 

To change a remote user's data manually:

1. Start at the Administration main menu and select:

Global Administration
     Messaging Administration

The system displays the SSH User Authentication dialog box. Enter your login, for example, sa or vm, in the User name field and your password in the Password field. Click Login. The system then displays the AUDIX Command Prompt screen.

2. Enter change remote-subscriber remote_user_extension at the enter command: prompt, where remote_user_extension is the extension of a user on the remote networked system.


 

Tip: To see a list of remote systems, use the list machines command as described in Viewing a List of Machines.

The system displays the Remote Subscriber screen.

3. Complete or change the fields on this screen by using the information provided in the table for Field Definitions: Remote Subscriber screen.

4. Press F3 (Enter) to save the information in the system database.

The cursor returns to the command line, and the system displays the following message:

Command Successfully Completed.

5. Repeat Step 2 through Step 4 for each remote user that you need to update.

6. Enter exit or another administrative command at the enter command: prompt or click Return to Main.

Top of page