This topic provides information about
changing local and remote machine names.
|
Note: If you change the
local machine profile, contact all remote network administrators and
inform them of the changes.
|
Renaming the Local Machine
A local machine is added when the INTUITY
AUDIX LX system is installed. You cannot add a second local machine
or delete a local machine. You can only rename the local machine.
After you rename the local machine,
you must restart the INTUITY AUDIX system by using the reset voice-mail
restart command for the new name to take effect. The restart process
takes some time and it is recommended that it be done during off hours.
See Restarting the Voice System for
more information.
To rename a local machine:
- Start at the Messaging Administration main menu and select .
The system then displays the AUDIX
Command Prompt screen after you enter your login.
- Enter change
machine at the
enter command: prompt.
The system displays page
1 of the Local Machine Profile screen.
- Type the new name
of the local machine in the
Name: field.
The machine name can be
up to 10 alphanumeric characters in length. The following rules apply:
- The machine name cannot contain blank (embedded)
spaces. For example, denver 1 is not allowed, but denver_1
is allowed.
- The Machine Name
field is a case-sensitive field. Uppercase letters must be entered
as uppercase, and lowercase letters as lowercase.
- Hyphens (-) are allowed.
- Underscores ( _ ) are allowed.
- The machine name cannot start with a number.
- Press F3 (Save)
to enter the new name into the system.
Renaming a Remote Machine
To change the name of a remote machine:
- Start at the Messaging Administration main menu and select .
The system then displays the AUDIX
Command Prompt screen after you enter your login.
- Enter change
machine remote_machine_name at the
enter command:
prompt.
The system displays page 1
of the Remote Machine Profile screen.
|
Note: If you do not know the names
of the remote machines, enter list machines at the enter
command: prompt. The system displays a list of all machines
administered on the system. |
- Enter the new name
for the remote machine in the
Name: field. The name must
be unique. The machine name can be up to 10 alphanumeric characters in
length. The following rules apply:
- The machine name cannot contain blank (embedded)
spaces. For example, denver 1 is not allowed, but denver_1
is allowed.
- The Machine Name
field is a case-sensitive field. Uppercase letters must be entered
as uppercase, and lowercase letters as lowercase.
- Hyphens (-) are allowed.
- Underscores ( _ ) are allowed.
- The machine name cannot start with a number.
- Press F3 (Save) to
enter the new name into the system.
