 |
Changing Class of Service Options
|
Use the COS screen to define each
Class of Service. Use the Subscriber screen to assign a COS to a subscriber.
Things to Consider About Changing
Class of Service Options
|
Effect of changes
|
When you change a Class of Service, that change
affects all subscribers to whom you have assigned that Class of
Service. For example, if you change the Incoming Mailbox Order
field from fifo to lifo for the Class of Service named class8,
the order of messages in the incoming mailbox changes for all
subscribers with class8 identified on their Subscriber screen.
|
|
Custom COS
|
After you assign a COS for a subscriber on
Page 1 of the Subscriber screen, the specific options for that
Class of Service appear on Page 2 of the Subscriber screen (shown
in Subscriber Class of Service Parameters screen, Page 2). You can then further customize the subscriber's
COS options by changing them on Page 2.
|
|
Printing screen information
|
If you would like to keep a paper copy of
the screen contents, precede the command display with the command
print. A printed copy could be helpful, especially if you create
several custom COSs.
Note: You must
have a system printer available and enabled to print screens and
reports. If you send print job requests and have no printer available,
the print jobs stay in the print queue, taking up required system
space.
|
Making Changes to a Class of
Service
To change a COS:
- Start at the Messaging Administration main menu and select .
The system displays the AUDIX
Command Prompt screen.
You can display a list of the current Classes
of Service if you are not sure of the name of the COS you want to edit.
- At the
enter
command: prompt, enter change COS COS-number/COS-name,
where COS-number/COS-name is the unique COS number (0–11)
or COS name you want to administer.
The system displays the
Class of Service screen, Page 1.
- Complete the fields
on this screen using the information provided in the table Field
Definitions: Class of Service screen, Page 1.
- Press F7 (NextPage).
The system displays the
Class of Service screen, Page 2.
- Complete the fields
on this screen by using the information provided in the table Field
Definitions: Class of Service screen, Page 2.
- Press F3 (Enter)
to save this information to the system database.
The cursor returns to the
command line, and the system displays the following message:
Command Successfully
Completed
Top of page
|
