The platform requires a dedicated
circuit with a dedicated circuit breaker. The power cord connects to
the rear of the system to the AC power inlet receptacle. See Back
View of Platform. Before you open the PC, you must remove power
to the system.
To remove power:
- Shut
down the system.
- Turn off the monitor's
power button.
Verify that the monitor's power
is off.
- Turn off the power by
pressing the power button on the front of the chassis. See Front
View of Platform.
The green power lamp on the front
of the unit should be off.
- Unplug the power cord
from the AC receptacle in the wall.
- If necessary, unplug the monitor cord from the PC.
