MT Events

MT AOMADM00001

Description:

One of the following events occurred

• The Alarm Destination field on the Alarm Management Window changed to phone number
• The Alarm Origination State field on the Alarm Management Window changed to ACTIVE
• The Alarm Origination State field on the Alarm Management Window changed to INACTIVE
• The Alarm Origination Level field on the Alarm Management Window changed to MAJOR
• The Alarm Origination Level field on the Alarm Management Window changed to MINOR
• The Clear Alarm Notification field on the Alarm Management Window changed to ACTIVE
• The Clear Alarm Notification field on the Alarm Management Window changed to INACTIVE

Repair Procedure:

No corrective action is necessary.

MT AOMADM00002

Description:

The system failed to contact the remote maintenance center three consecutive times.

 

Note: When the remote maintenance center telephone line is busy, it is counted as a failure.

Repair Procedure:

1. Check the alarm log for the MT ALARM_ORIG 1 alarm.
2. If MT ALARM_ORIG 1 is active, perform the corresponding repair procedure.

If MT ALARM_ORIG 1 is not active, check connections on modem.

3. If the problem persists, contact the remote maintenance center.

MT BKDONE

Description:

The system successfully completed the backup process.

Repair Procedure:

No corrective action is necessary.

MT BKRST029

Description:

The system completed a partial nightly backup.

Repair Procedure:

No corrective action is necessary.

MT RSTDONE

Description:

The system completed a restore successfully.

Repair Procedure:

No corrective action is necessary.

MT UDTADM00000

Description:

The system successfully changed the date and time.

Repair Procedure:

No corrective action is necessary.

MT UDTADM00001

Description:

A date or time change failed.

 

Note: If you entered an incorrect value while changing date and time, an error is displayed on the UNIX Management screen when you press F3 (Save). The system gives you the opportunity to correct the entry and logs this message.

Repair Procedure:

No corrective action is necessary.

MT UDTADM00002

Description:

The system successfully executed a stop and start of the cron process.

 

Note: This occurs whenever you change the system date or time.

Repair Procedure:

No corrective action is necessary.

MT UDTADM00003

Description:

The system failed to run a stop and start of the cron process.

 

Note: If the system is unable to stop and start cron, the system displays an error on the UNIX Management screen when you press the F3 (Save) key and logs this message.

Repair Procedure:

No corrective action is necessary.

MT UDTADM00004

Description:

The system successfully changed the date and time.

Repair Procedure:

No corrective action is necessary.

MT UDTADM00005

Description:

The system failed to change the timezone.

 

Note: If you enter an incorrect value while changing date and time, the system displays an error when you press F3(Save) and logs this message.

Repair Procedure:

No corrective action is necessary.

http://www.avaya.com Avaya UCS Information Development