Checking Operation of the New System

After assembling the new system, check to make sure that it is working properly before shutting down service on the old system. You might also need to install the upgrade package or change the selected switch integration.

To check operation of the new system:

1. If you are using the A/B switch box with a single monitor, turn the switch to the new system.
2. Connect electrical power to the new system and turn on the power switch.

The system starts up. After some time, it displays the login prompt.

3. Log in as craft

The system displays the Avaya Intuity Main Menu.

4. Check the Avaya Intuity Main Menu for the System Upgrade menu option.
5. Do one of the following:
• If the System Upgrade menu option is displayed, go to the next task, Installing the Upgrade Backup Software on the Old System.
• If the System Upgrade menu option is not displayed, go to Step�6.
6. Insert the latest Intuity AUDIX R5 software CD-ROM in the Avaya Intuity system CD-ROM drive.
7. Start at the Avaya Intuity Main Menu and select:

Software Management
	Software Installation
		CD

The system displays the following message:

***SOFTWARE INSTALL***

A successful backup has not been completed in the past 2 hours. In the unlikely event of a catastrophic failure during this upgrade procedure, a full system backup may be the only method of recovering the customer's data. Doing a full system backup is HIGHLY recommended.

Do you want to continue with the upgrade anyway?
(*) Yes, continue this operation without full system backup
( ) No, quit this operation in order to complete full system backup


8. Move the cursor to Yes and then press ENTER to continue with the installation.
9. Press the DOWN ARROW key until the cursor highlights the following entry on the second page of the software packages screen in the Applications Software Group:

[ ] upgset -- Intuity Upgrade Utility
 


Note: You might need to scroll through several screens.

10. Press ENTER.

The system displays the following line:

[X] upgset -- Intuity Upgrade Utility

11. Press the DOWN ARROW key until the cursor highlights the following message:

Install selected packages
 


Note: You then scroll through several screens.

12. Press ENTER.

The system displays the following message:

You selected the following packages from the CD:

*upgset -- Est. Installation Time: 5 minutes

Total Estimated Installation time is 0 hours and 5 minutes.

13. Make sure that the cursor is on PROCEED and then press ENTER.

The system installs the package and then displays the following message:

Do you have more media from which to install more software?

14. Enter n

The system displays the following message:

Do you have hardware to install?

15. Enter n

The system displays the System Management menu.

16. Press F6 (Cancel) twice to log off the system.


 


Note: The system does not display the System Upgrade menu option on the Avaya Intuity Main Menu until you log back in to the system again.

17. Log in to the Avaya Intuity system as craft
18. Check the Avaya Intuity Main Menu for the System Upgrade menu option.
19. Remove the Intuity AUDIX R5 software CD-ROM from the CD-ROM drive.
20. Verify the switch integration on the old system.
21. Verify the switch integration on the new system:
1. From the Intuity AUDIX Main Menu, select:

		Feature Options

The Feature Options screen is displayed.

2. Press the UP arrow, then press F7 (Switch Select).

The Switch Selection screen is displayed.

3. Verify the name of the switch integration in the Switch: field.
22. Do one of the following:
• If the switch integration on the old system is the same as the switch integration on the new system, continue with the next task.
• If the switch integration on the old system is not the same as the switch integration on the new system, contact the MMIS to change the integration.

http://www.avaya.com Avaya UCS Information Development