Changing options for a TTS server

Note:
To change the server assigned to a TTS type, you must first unassign the server, then assign a different TTS type to the server.

To change options for a TTS server:

1. From web administration, go to the Speech Proxy Administration screen (Feature Packages > Speech and DPR Administration > Administration).
2. Select Text-to-Speech Configuration.

   The system displays the Text-to-Speech Configuration screen. For information about this screen, see Text-to-Speech Configuration screen.

3. In the Text-to-Speech Type field, select the TTS type for which you want to change the server.
4. On the lower part of the screen associated with the server you want to change, select Change.

   The system displays the Change Text-to-Speech Server screen. For information about this screen, see Change TTS server screen.

5. In the Server Name field, select the name of the TTS server whose options you wish to change.
6. In the IP Address field, type the IP address of the TTS server.
7. In the Ports field, type the number of ports that are available on the TTS server. (This field applies to SAPI and MRCP TTS servers.)
8. In the Base Port field, type the port number used for connecting to the TTS server. (This field only applies to MRCP TTS servers.)
9. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system (see Stopping and starting the voice system).

© 2006 Avaya Inc. All Rights Reserved.