Unassigning a speech or DPR server

To unassign a speech or DPR server:

1. From web administration, go to the Speech Proxy Administration screen (Feature Packages > Speech and DPR Administration > Administration).
2. Select Speech Recognition and DPR Configuration.

   The system displays the Speech Recognition and DPR Configuration screen. For information about this screen, see Speech Recognition and DPR Configuration screen.

3. In the Recognition Type field, select the recognition type for which you want to unassign the speech or DPR server.
4. On the lower part of the screen that corresponds to the server you want to unassign, select Unassign.

   The system displays a dialog box with the following message:
   This action will completely remove this server, are you sure you want to continue?

5. Select OK.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system (see Stopping and starting the voice system).

© 2006 Avaya Inc. All Rights Reserved.