Avaya Logo

Previous Topic

Next Topic

Book Contents

Book Index

Changing options for a speech or DPR server

Note:
To change the server assigned to a recognition type, you must first unassign the server, then reassign it to a different recognition type.

To change the options for a speech or DPR server:

  1. From web administration, go to the Speech Proxy Administration screen (Feature Packages > Speech and DPR Administration > Administration).
  2. Select Speech Recognition and DPR Configuration.

    The system displays the Speech Recognition and DPR Configuration screen. For information about this screen, see Speech Recognition and DPR Configuration screen.

  3. In the Recognition Type field, select the recognition type for which you want to change server options.
  4. On the lower part of the screen that corresponds to the server you want to change, select Change.

    The system displays the Change Speech Recognition Server screen. For information about this screen, see Change Speech Recognition Server screen

  5. In the IP Address field, type the IP address of the speech or DPR server.
  6. In the Ports field, type the number of ports that are available on the speech or DPR server.
  7. In the Base Port field, do one of the following:
  8. Select Submit.

    The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system (see Stopping and starting the voice system).

© 2006 Avaya Inc. All Rights Reserved.