more topics

Pools Feature

System Programming

Assign Lines/Trunks to Pools  

Programmable by

System Manager

Mode

Hybrid/PBX

Idle Condition

Trunk idle

Planning Form

2c, System Numbering: Line/Trunk Jacks

Factory Setting

All loop-start trunks are assigned to the main trunk pool (factory-set extension number 70); all tie trunks are assigned to the trunk pool with the factory-set extension number 891. Ground-Start Trunk Pool to ext. 890; Automatic-In Tie Trunk to ext. 892. No factory-set extension numbers are assigned to ground-start trunks.

Valid Entries Line numbers
Inspect Yes
Copy Option

Yes

Procedure

Assign a single line/trunk to a pool:

LinesTrunks PoolsDial pool dial-out code
Select entry modeDial no. of the line/trunk
Enter Back
Back

Assign a block of lines/trunks to a pool:

LinesTrunksPoolsDial pool dial-out code
Select block of lines/trunksToggle LED On/Off
Enter
BackBack

 

Assign Pools to Extensions  

Programmable by

System Manager

Mode

All, but note differences in factory settings.

Idle Condition

Extension idle

Planning Form

4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
4h, ETR Telephone
4j, MLS Telephone
4l, Extension Copy: Multiline 4400-Series Telephone Template
4m, Multiline 4400-Series Telephone
4o, Wireless Telephone
5b, Direct-Line Console (DLC)
5c, MFM Adjunct: DLC
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation

Factory Setting

No pool buttons are assigned.

Valid Entries Extension numbers
Inspect Yes
Copy Option

Yes

Procedure

Assign a single Pool button:

Extensions Lines/TrunksDial ext. no.Enter
Entry Mode
Dial line/trunk no.Enter BackBack

Assign a block of Pool buttons:

Extensions Lines/TrunksDial ext. no.Enter
Select trunk rangeToggle LED On/OffEnter BackBack

Pool Dial-Out Code  

Programmable by

System Manager

Mode

Hybrid/PBX

Idle Condition

Extension idle

Planning Form

4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
4h, ETR Telephone
4j, MLS Telephone
4k, 4400/4400D Telephone
4m, Multiline 4400-Series Telephone
4o, Wireless Telephone
5b, Direct-Line Console (DLC)
5c, MFM Adjunct (DLC)
5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation

Factory Setting

Main pool: 70; All other pools: 890 to 899. All telephones are restricted from dialing any pool dial-out code.

Valid Entries Pool numbers
Inspect Yes
Copy Option

No

Procedure

Restrict telephone from using pool dial-out code:

Extensions Dial OutCdDial ext. no.Enter
Dial pool dial-out codeEnter BackBack

Topics
  Description
  At a Glance
  Considerations & Constraints
  System Programming
  Mode Differences
Telephone Differences
Feature Interactions