System Manager

All

Not required

3a, Incoming Trunks: Remote Access

Remote Access is not assigned

No

Assign dedicated or shared Remote Access to lines/trunks:

LinesTrunksRemoteAccssLinesTrunks
Dial line/trunk no.Enterspecify how trunk is used (Dedicated, Shared, No Remote)EnterBackBack

System Manager

All

Not required

3a, Incoming Trunks: Remote Access

Call restriction: Outward restricted
ARS restriction level: 3

No

If barrier codes are not used, assign class of restrictions to lines/trunks:

To change calling restrictions:

LinesTrunks RemoteAccssSelect Non-TIE or TIE LinesRestrictionSelect restrictionEnter
BackBackBackBack

To change ARS Facility Restriction Level:

LinesTrunks RemoteAccssSelect Non-TIE or TIE LinesARS RestrictDropDial FRL valueEnter
BackBackBackBack

To assign/remove Allowed Lists:

LinesTrunks RemoteAccssSelect Non-TIE or TIE LinesAllow ListDial list no.Enter
BackBackBackBack

To assign/remove Disallowed Lists:

LinesTrunks RemoteAccss Select Non-TIE or TIE LinesDisallowLstDial list no.Enter
BackBackBackBack

System Manager

All

Not required

3a, Incoming Trunks: Remote Access

Calling restrictions:
Barrier Code: outward restricted
All other barrier codes: unrestricted
ARS restriction level: 3

No

Assign class of restriction for each barrier code:

LinesTrunks RemoteAccssBarrierCode
RestrictionDial barrier code no.EnterSelect restrictionEnter ARS RestrictDial barrier code no.EnterDropDial FRL valueEnterSelect Allow List or Disallow ListDial barrier code no. (1-16)Enter
Dial list no.Enter BackBackBackBack

System Manager

All

Not required

3a, Incoming Trunks: Remote Access

No barrier codes are established

No

Specify that barrier codes are required for Remote Access:

To establish or remove code requirements:

LinesTrunks RemoteAccssSelect Non-TIE or TIE LinesBarrierCodeSpecify whether barrier codes are requiredEnter BackBackBack

To change barrier code length:

LinesTrunks RemoteAccssBarrierCodeCode InfoCode Length DropDial code lengthEnter
YesBackBackBack

To change barrier code:

LinesTrunks RemoteAccssBarrierCodeCode InfoCode Entry Dial code IDEnterDropDial codeEnter BackBackBack

 

System Manager

Hybrid/PBX

Not required

3a, Incoming Trunks: Remote Access

Disable

No

Enable or disable Callback for busy pools:

LinesTrunks RemoteAccssAutoQueuingSelect
Enable or Disable EnterBackBack

System Manager

All

Not required

8a, System Features

Extension number of primary operator

No

Specify destination of Remote Access calls to unassigned numbers:

To select QCC queue:

Options or MoreUnassigned QCC Queue
EnterBack

To select extension or Calling Group:

Options or MoreUnassignedSelect Extension or Grp CallingEnterDial ext. no. or group no.
Enter Back