Speed Dial Feature

Mode Differences

Hybrid/PBX Mode

A pool dial-out code or an Idle Line Preference access code can be included with the telephone number in a Personal Speed Dial or System Speed Dial code. To allow time to receive a local telephone company dial tone, Pause characters may be required immediately following either a pool dial-out code or an access code for a long-distance carrier. Pauses are not needed following the ARS code.

When ARS is used, press the pound sign (#) twice after the dialed digits during programming of a Personal Speed Dial or System Speed Dial code for a 7-digit toll number. This signals the end of the dialing sequence. See Appendix H, Programming Special Characters, for information about special characters.

The user can program into Personal Speed Dial or System Speed Dial codes any dial-out codes required by the host system.

To allow time to receive a telephone company dial tone, Pause characters may be programmed after a pool dial-out code. Pause characters may also be required by the host system or after entering an access code for a long-distance carrier.

Topics
	Description
	System Speed Dial Personal Speed Dial
	At a Glance
	Considerations & Constraints
	Mode Differences
	Telephone Differences
	Feature Interactions