|
If you are installing Message Networking on an S3210 or S3210R server or
you are installing on an S3400-H in an international setup, which
requires use of an external modem, you must complete the following
steps to activate the modem.
To configure the modem:
- Log in to the system with the craft or dadmin login and password.
- Start at the Administration menu and select Basic System
Administration > Modem and Terminal Administration >
Configure Modem/Terminal.
The Configure Modem/Terminal page displays.
- Complete the fields for the modem you are installing. See the
online Help for additional information about each field.
- Click Save at the bottom of the page.
Notes:
- Alarm origination can only be set up on the COM2 port, so this
port must be activated before you perform alarm management.
- If you purchase the Avaya Communication Manager Fault and Performance
Manager, you must configure the Install Modem/Terminal Software
page to comply with the MFPM modem as follows:
- Select Other in the Modem Type field.
- Select 9400 in the Speed field
- In the Modem Init String field, enter the following
(entry is case-sensitive; all 0's are zeros):
AT&F&M0Q2&C1&D2&R1&H0&U2&N2&K0S0=0S13=1Y0&W0
Top of page
|
