|
Use the Add New Machine: Serenade Digital page to add
a new Serenade Digital remote machine to the Message Networking
system or to modify an existing machine.
This page contains the following fields.
New Machine Name: Type a unique name for
the remote machine you are adding. The machine name can be up to 23 alphanumeric
characters:
- Enter uppercase letters as uppercase.
- Enter lowercase letters as lowercase.
- Use a hyphen (-) or an underscore (_).
- These names cannot start with a number.
- There can be no blank spaces.
Note: The name must be unique on both the local Message Networking
network as well as any other Message Networking systems in the network. To ensure
that you are using a unique name, check the
Remote Machines List on all Message Networking systems in your network.
Machine Type: Select Serenade
Digital.
Bridged Machine: Specify whether this
remote machine is to be used as a bridged machine. Bridged machines are used by
Message Networking to pass messages between nonbridged remote machines. Select
yes to indicate that this remote machine is to be used as a bridged
machine. If this remote machine is not being used as a bridged machine, select
no. The number of remote machines that can be used as a bridge
is specified by the Number of Bridged Nodes field on the Customer
Options page.
Note: The Bridged Machine field does not appear if the Number
of Bridged Machines on the Customer Options page
is set to 500 (the maximum).
Send FAX Messages?: Specify whether fax messages
are allowed for the remote machine. Select Yes to allow fax messages
or No to restrict fax messages.
IP address: Type the IP address
of the machine, up to 29 characters (for example 192.43.235.1).
Message Networking uses the IP address to contact and send messages
to remote machines. Make sure that you enter the correct IP address
as the system does not validate the number you enter.
Note: If you plan to use the Domain Name Server (DNS) feature,
you do not have to enter a value for this field.
Mailbox ID Length: Type the number of digits
in mailbox IDs on the remote machine, up to 10 digits.
Note: To change the Mailbox ID Length after initial system administration, see Changing a remote machine's mailbox number length for the steps you must complete to successfully change this field.
Default Language: Use this field to specify
the default language on the remote machine. If more than one language is installed
on the system, select the language from the drop-down menu. The default for
this field is en-US (US English).
If you change the Default Language after initial remote machine administration,
subscribers that you subsequently add to the remote machine are assigned the
new Default Language as their default Language ID. However, the Language IDs
of existing subscribers on the remote machine do not change.
Failed Msg. Notification Priority?: Indicates
whether to mark failed message notifications with priority status. Select yes
to mark failed message notifications with priority status. Select no
if you do not want to mark failed message notifications with priority status.
The default for this field is no.
Msg ID?: Specify whether to include the original
message ID in failed message notifications. Select yes to include the
original message ID. Select no if you do not want to include the original
message ID in failed message notifications. The default for this field is no.
Send Message for EAW?: Specify whether the original
message is sent back to a subscriber after that subscriber has sent a message
from this machine to an Aria machine that has the Extended Absence Greeting
(EAG) warning activated. This message return is in addition to the message indicating
the actual EAG warning condition. Select yes to return the original message.
Select no if you do not want to return the original message. The default
for this field is no.
Default NameNet Type: Specify the default NameNet
type, set up on the remote machine, that is used for aging purposes by the remote
machine. Type p if directory entries are permanent. Type u if
entries are usage-based, which indicates that directory entries are temporarily
available based on the network traffic of a particular remote machine. The default
for this field is u.
Organization: Use this field to provide a description
of the organization using Message Networking, up to 64 characters. This field
is optional and for informational purposes only.
Organization Unit: Use this field to provide a description
of the organization unit using Message Networking, up to 64 characters. This field
is optional and for informational purposes only.
Node ID: Unique node ID for this remote
machine. This field is display-only and cannot be modified.
Comments: You can optionally type any comments about
this remote machine, up to 68 alphanumeric characters. This field is optional
and for informational purposes only.
Default Community ID: Community identifier for
all subscribers added to this remote machine. An integer of 1 through 15.
Subscriber Updates Type: Select
the type of remote subscriber updates to be sent to this remote
machine:
- directory-view: Select directory-view to specify
that updates should be sent to the remote machine only for the network address
ranges defined in the remote machine's Directory
View.
- dynamic: Select dynamic to specify that the remote
machine should receive updates for subscribers that exchange messages with
this remote machine.
- full: Select full if you want full updates sent
for all remote machines on the Message Networking system to this remote machine.
If you select full, verify that the remote machine has enough space for information
on all subscribers from all remote machines connected to the Message Networking
system.
The default for this field is dynamic. To receive no updates,
select directory-view, make sure no views are defined for
this remote machine, and then set the Updates: Out? field to n.
Updates In: Specify whether the Message Networking
system can receive updated user database information from this remote machine.
Select yes if this Message Networking system accepts updated user information
from this remote machine. Select no if this Message Networking system
does not accept updated user information from this remote machine. The default
for this field is no.
Updates Out?: Specify whether Message Networking
is able to send user information updates to this remote machine. Select yes
if this Message Networking system sends user information updates to remote machines.
Select no if this Message Networking system does not send user information
updates to remote machines. The default for this field is no.
Voiced Names for Dynamic?: If the Subscriber
Updates Type is set to dynamic, specify whether to include the subscriber's
voiced name in the update. You cannot modify this field until a new remote machine
is saved .Select yes to include the voiced name. Select no if
you do not want to include the voiced name. The default for this field is
yes.
ASCII Name Confirmation?: Specify whether the
ASCII name is verified when a subscriber sends a message using NameNet. If the
name does not match, the Message Networking system requests an update. Select
yes to verify the ASCII name. Select no if you do not want to
verify the ASCII name. The default for this field is yes.
Dynamic Sub Expiration Days: Type the number of
days a dynamically-added subscriber can exist without performing any activity
(without sending or receiving messages). This number must match the number of
aging days administered on the remote machine. The default for this field is
90. The minimum for this field is 1. The maximum for this field is 999.
System Mailbox ID: The System Mailbox
ID is the system mailbox number used by the protocol for the remote
machine, up to 10 digits. The default for this field is 0. This
mailbox address must match the system mailbox set up on the remote
machine. For information on the system mailbox, see your remote
machine administration documentation.
Note: This field must be completed for Serenade Analog
remote machines and must match the Serenade system mailbox ID.
If you are modifying an existing machine, click Save to
save your changes. If you are adding a new machine, click Next
Step to save the remote machine and administer
Dial Plan Mapping, or click Add this Machine if you do
not want to administer Dial Plan Mapping at this time:
- If you click Next Step, the Administer Dial Plan Mapping
page displays.
- If you click Add this Machine, a message displays that
the parameters have been saved. Click OK.
Note: In some dial plans when a message is going to a Serenade
user, the Message Networking system must add a prefix to the network
address to build a complete sender address. You can administer
a Serenade Digital Sender Dial Plan to specify the prefix to
add to a network address.
Top of page
|
