Avaya

Modular Messaging Help

Print | Back | Fwd | Close
Home | Search | Site Index
 Getting Started 
 Administration 
 Maintenance 
 Reference 
 
Home > Maintenance > System component replacement > Circuit card replacement > Settings for analog boards > Setting D/41JCT-LS board CT bus termination

Setting D/41JCT-LS board CT bus termination

 

  • The setting on the left is ON (pins 1 and 2 are jumpered). The CT bus is terminated.
  • The setting on the right is OFF. The CT bus is not terminated.

 

Top of page

Home | Search | Site Index | Print | Back | Fwd | Close

©2004 Avaya Inc. All rights reserved. Last modified 2 February, 2004