VMSC - VMD - PBX Configuration - Outgoing Call Tab (QSIG)

Use the PBX Configuration dialog box, Outgoing Call tab to configure the properties of an outgoing call in a voice mail domain.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the QSIG PBX. The system displays the PBX Configuration dialog box for the selected VMD, with the General tab active.

Click the Outgoing Call tab.

Configuring the Screen Controls

Layer1 Protocol This value defines the Layer 1 protocol used with the outgoing call. Select one of the following supported values:

G.711�-law (mu-law).

G.711A-law (default).

Note: Ensure that the form of G.711 encoding matches that of the switch. In general, �-law (mu-law) is used in North America and Japan, and A-law is used in Europe. If your choice of encoding scheme does not match the switch, then audio will sound garbled.

BC Transfer Cap This value defines the transfer rate for bearer capability information. Select one of the following supported values:

Speech (default)

Unrestricted Digital Data

Restricted Digital Data

Number Type Select the number type designated by the local ISDN provider. Select one of the following supported values:

Unknown (default)

International

National

Local

Number Plan Select the number plan designated by the local ISDN provider. Select one of the following supported values:

Unknown (default)

ISDN/Telephony E.164/E.163

Private

Origin Number This is the originating telephone number for all outgoing calls. This must be a unique number that does not conflict with any other extension in the MAS. You can enter up to 32 digits, and the default is 9999.