VMSC - VMD - PBX Configuration Dialog Box (QSIG)

This topic describes how to use the PBX Configuration dialog box to configure Private Branch Exchange (PBX) properties, if you are using Q-Signaling (QSIG) cards.

You can configure the PBX to determine the way in which it communicates with the voice mail domain. The PBX is sometimes referred to as the “switch”.

Use the PBX Configuration dialog box to configure the PBX Dual Tone Multi-Frequency (DTMF) dialing tones, the transfer mode, tone detection, outgoing call options, and intercom paging.


Notes: In the Voice Mail System Configuration window, under the Voice Mail Domain tree, PBXs node, you can add new PBXs types, if necessary. See VMSC - VMD - Add New PBX Dialog Box. For more information on configuring your PBX, see the PBX configuration notes. Configuration notes are available from the Avaya Support Website at http://www.avaya.com/support.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the QSIG PBX. The system displays the PBX Configuration dialog box for the selected VMD.

Tabs Available in this Dialog Box

General Use this tab to set up general PBX options. You can use it to set options for dual tone multi-frequency (DTMF) dialing tones. See VMSC - VMD - PBX Configuration - General Tab (QSIG).

Transfer/Outcall Use this tab to configure the transfer mode. See VMSC - VMD - PBX Configuration - Transfer/Outcall Tab (QSIG).

Tone Detection Use this tab to specify the maximum silence before hanging up. See VMSC - VMD - PBX Configuration - Tone Detection Tab (QSIG).

Outgoing Call Use this tab to set up PBX outgoing call options, including the layer 1 protocol and the number type. See VMSC - VMD - PBX Configuration - Outgoing Call Tab (QSIG).

Intercom Paging Use this tab to set up PBX intercom paging options. Intercom paging allows callers to page subscribers in the building, if they do not answer their extensions. See VMSC - VMD - PBX Configuration - Intercom Paging Tab (QSIG).