VMSC - MAS - PBX Integration - Serial NEC/Ericsson/DMID Tab

Use the PBX Integration dialog box, Serial NEC/Ericsson/DMID tab to configure serial integration for either DMID, NEC-2400 or Ericsson MD-110 protocols.

To open the PBX Integration dialog box:

In the Voice Mail System Configuration window, click Message Application Servers.

You may need to expand the tree to see the all the MASs in the voice mail domain.

Click the MAS you want to integrate.

You may need to expand the tree to see the available PBXs

Double-click PBX Integration. The system displays the PBX Integration dialog box for that MAS, with the General tab active.

To activate the Serial NEC/Ericsson/DMID tab:

In the General tab of the PBX Integration dialog, click the Serial option button in the Integration Type list.

In the Max Time to Wait for Serial and Remote Integration Data (sec) field, type the maximum time, in seconds, that an incoming call waits to receive integration information before going off hook. The default is 18.

Click the Serial General tab.

In the Packet Format field select either DMID, NEC-2400 or Ericsson MD-110.

Configure any other settings as appropriate. See VMSC - MAS - PBX Integration - Serial General Tab.

Click the Serial NEC/Ericsson/DMID tab.

To configure PBX Integration Serial NEC/Ericsson/DMID properties, complete the following fields:

NEC-2400

Tenant Number Enter the tenant number used by NEC integration. The range is 1 through 99, and the default is 1.

Ericsson MD110:

Filler Character Enter the filler character used by Ericsson integration: Zero or Space (default).

Port Field Length Enter the length of the port number field. The range is 2 though 5, and the default is 2.

Tenant Number Enter the tenant number used by Ericsson integration. The range is 1 through 99, and the default is 1.

First Port Number Enter the number of the first port to receive incoming calls. The range is 1 through 250, and the default is 1.

DMID:

Enable Full Error Logging from DMID Integration Device Select to place any errors reported by the DMID integration device in the Windows 2000/2003 Significant Event Log. This check box is cleared by default.

Extension of First Port in DMID Hunt Chain Enter the extension number of the port that is the first directory number in the hunt chain programmed for the DMID device. This must be a valid extension number. This field is blank by default.