VMSC - VMD - PBX Configuration Dialog Box (Set Emulation)

This topic describes how to use the PBX Configuration (Set Emulation) dialog box to configure Private Branch Exchange (PBX) properties, if you are using set emulation cards.

To open the PBX Configuration dialog box:

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the Set Emulation PBX. The system displays the PBX Configuration (Set Emulation) dialog box for the selected VMD.

You can configure properties in the following PBX Configuration (Set Emulation) tabs:

General Use this tab to set up general PBX options. You can use it to set options for dual tone multi-frequency (DTMF) dialing tones.

See VMSC - VMD - PBX Configuration - General Tab (Set Emulation).

Transfer/Outcall Use this tab to set up PBX call transfer options, including the transfer mode and call progress options.

See VMSC - VMD - PBX Configuration - Transfer/Outcall Tab (Set Emulation).

Tone Detection Use this tab to set up PBX hangup-detection options.

See VMSC - VMD - PBX Configuration - Tone Detection Tab (Set Emulation).

Intercom Paging Use this tab to set up PBX intercom paging options. Intercom paging allows callers to page subscribers in the building, if they do not answer their extensions.

See VMSC - VMD - PBX Configuration - Intercom Paging Tab (Set Emulation).