 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Made Easy Tool for DEFINITY Media Server Configurations
Issue 4, May 2002
G3V4vs/R5vs/R6vs to Avaya MultiVantage
G3V4vs/R5vs/R6vs to
Avaya MultiVantage
This section provides the information necessary to upgrade a DEFINITY ® vs (G3V4vs, R5vs, or R6vs) system to Avaya MultiVantage.
The vs cabinet cannot be upgraded to Avaya MultiVantage. To upgrade a vs cabinet, you must change out the vs cabinet and install an si cabinet (SCC1). You can reuse the port circuit packs from the vs system only if a site inspection determines that the port circuit pack vintages are reusable.
- System Description
- When to use the TN2401 versus the TN2401/TN2400 sandwich pack
Before you begin the upgrade
Review the Preparation and process steps carefully. These tables describe the tasks that must be completed before the upgrade visit and who is responsible for them.
To prevent the most common upgrade problems, be sure that you have
- identified the correct TDM bus cables and terminators for the upgraded system
- verified si expansion interface compatibility for packet bus applications:
- checked for software upgrade compatibility and identified any patches that need to be re-applied
- create the license file with RFA
If the new si system will have one or more expansion port network cabinets and will run any packet applications, do not reuse the TN776 expansion interface circuit packs; they must be replaced with TN570 circuit packs.
Task List: DEFINITY vs to Avaya MultiVantage si
Ensure that these tasks are complete before the upgrade visit:
- Verify the required hardware [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Provide the required tools [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Go to the RFA website
- Pre-upgrade administration [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
Perform these tasks during the upgrade visit:
- Unpack and inspect control cabinet [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Install new control cabinet [G3V4vs, R5vs, R6vs to Avaya MultiVantage si] or Install new control cabinet with earthquake protection [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Label and connect cables [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Install TDM/LAN bus terminators [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Swing existing system into maintenance position [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Check existing software load [G3V4vs, R5vs, R6vs to Avaya MultiVantage si] to identify any software patches.
- Verify system status [G3V4vs, R5vs, R6vs to Avaya MultiVantage si] Record any customer-placed busy-outs.
- Disable scheduled maintenance and alarm origination [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Check link status [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Record all links and remove only ISDN interface links [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Disable TTI [G3V4vs, R5vs, R6vs to Avaya MultiVantage si] if it is enabled. Do not skip this step!
- Save translation [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Save recorded announcements (TN750B) [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- List configuration software version [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- For systems so equipped: Shut down DEFINITY LAN Gateway system [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- For systems so equipped: Shut down the DEFINITY AUDIX system [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Power down existing system [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Remove ground connections [G3V4vs, R5vs, R6vs to Avaya MultiVantage si]
- Move 25-pair cables from G3V4vs System to Avaya MultiVantage si
- Move management terminal cable from G3V4vs System to Avaya MultiVantage si
Translations can be corrupted if TTI is enabled. Confirm that TTI is completely disabled before you continue!
Confirm that TTI is completely disabled before you continue!