Web Agent Procedure

To set Summer Time Hours that are not based on a standard rule using the Web Agent:

1. In the navigation pane, expand the System > Configuration folders, and then click System Clock.

The System Clock Web page is displayed in the content pane. See Figure�26.

2. In the Clock Options field, click Summer Time Hours Algorithm. The Summer Time Hours Configuration Web page is displayed in the content pane. See Figure�27.
3. Select Enable in the Enable State field. The default is Disable.
4. Enter the reset value for the clock in minutes in the Offset field. For example, if you intend to reset the clock forward or backward by one hour, keep the default value of 60 minutes.
5. Select the check box next to the One-Time field to set the date and time for Summer Time Hours on a one-time basis:
1. Enter the specific Month, Day, and Year when the Summer Time Hours start and end.
2. Enter the Hour and Minutes when the Summer Time Hours start and end.
6. Click APPLY to save your changes, or CANCEL to clear your selection.

See Table�14 for detailed information about the One-Time field parameters for the Summer Time Hours Configuration Web page.