Displaying the IPX Route Table

To display the IPX route table:

1. Perform an IPX Route Table search as described in “Searching the IPX Route Table.” If available routes are found they are displayed in the IPX Route Table dialog box.
2. See Table 16-8 to review your configuration:

   Table 16-8. IPX Route Table Parameters

   Parameter	Defines the...
   Select	Parameter selected.
   Network	Network number (in hex) of the IPX network.
   Interface	Interface associated with the IPX network.
   Source	Method by which the network was learned. For example, RIP, local, or static.
   TTL	Number of seconds before the route expires.
   Ticks	Amount of time (in ticks) that the packet takes to reach the network number you specified. A tick is approximately 1/18th of a second.
   Hops	Number of routers (hops) that the packet must pass through before reaching the network number associated with the IPX network.
   Next-Hop MAC Address	MAC address of the next destination through which the network is reached.