Displaying the IPX Service Table

To display the IPX service table:

1. Perform an IPX Service table search as described in “Searching the IPX Service Table” earlier in this chapter. If available services are found they are displayed in the IPX Service Table dialog box.
2. See Table 16-11 to review each field in the IPX Services table:

   Table 16-11. IPX Service Table Parameters

   Parameter	Defines the...
   Select	Parameter selected.
   Name	Name of the service in question. For example, FS_ENG01. (Use SLIST (NetWare 3.x) or NLIST (NetWare 4.x) to list your current server names and types from your NetWare server.)
   Type	Service type that identifies the type of service the server provides. Well known service types include: Unknown (0) Print Queue (3) File Server (4) Job Server (5) Print Server (7) Archive Server (9) Remote Bridge Server (24) Advertising Print Server (47)
   Network	Network number of the IPX service.
   Node	Node address of the service.
   Socket	Number associated with a running process on the end node (for example, RIP, NLSP).
   Interface	Interface associated with the next hop to the service.
   Source	Method by which the service was learned. For example, SAP or static.
   TTL	Number of seconds before the service expires.
   Hops	Number of routers (hops) that the packet must pass through before reaching the network number associated with the service.
   Next-Hop MAC Address	MAC address of the next destination through which the service is reached.