Web Agent Procedure

To copy files using the Web Agent:

1. Select File Management from the System > Configuration > Configuration Files group in the navigation pane. The Configuration File Management Web page opens (Figure 2-19).
2. See Table 2-6 for an explanation of the Configuration File Management Web page parameters.

   Table 2-6. Configuration File Management Web Page Parameters

   Parameter	Description	Options
   Save Running-Config to Startup-Config	Saves the running configuration to the startup configuration	N/A
   Copy Source	Specifies the source file to be copied	Unspecified - Specifies an initialized value. File - Specifies a source file located on the switch in NVRAM. Running-Config - Specifies a running configuration. Startup-Config - Specifies a startup configuration. TFTP Server - Specifies a source file located in a directory on a TFTP server.
   Source Filename	Specifies the path and name of the source file	Source files can be ASCII files in NVRAM available for upload or files located on a TFTP server available for download
   Copy Destination	Specifies the location of the destination	Unspecified- Specifies an initialized value. File - Specifies that a source is copied or downloaded to NVRAM. Running-Config - Specifies that a source is copied to the running configuration. Startup-Config - Specifies that a source is copied to the startup configuration. TFTP Server - Specifies that a source is copied to a TFTP server location.
   Destination Filename	Specifies the path and name of the destination file	Configuration files and other files can be copied to NVRAM on the switch or to a TFTP server as a destination location.
   TFTP Server IP Address	Specifies the IP address of a source or destination TFTP server	Copy (download) source files, located on a TFTP server, to your running configuration, your startup configuration, or a location on the switch. Or, copy (upload) your configuration files, or a file located on the switch, to a TFTP server.

• File -- To copy a file stored on the switch to your running or startup configuration, to a location on the switch, or to a location on a TFTP server.
• TFTP Server -- To copy a file stored on a TFTP server to your running or startup configuration or to a file on the switch.

NOTE: If you select File or TFTP Server, you must also provide the path and filename of the source file in the Destination Filename field.

3. Select one of the following from the Copy Destination
   pull-down menu.
• Running-Config -- Copies your startup configuration, or other file located on the switch or on a TFTP server, to your running configuration.
• Startup-Config -- Copies your running configuration, or other file located on the switch or on a TFTP server, to your startup configuration.
• File -- Copies your startup or running configuration, another file located on the switch, or a file located on a TFTP server to a file on the switch.
• TFTP Server -- Copies your startup or running configuration, or another file located on the switch, to a location on a TFTP server.

NOTE: If you select File or TFTP Server, you must also provide the path and filename of the destination file in the Source Destination field.

4. Enter the IP address of the source or destination TFTP server in the TFTP Server IP Address field, if applicable.
5. Click Copy. The source configuration or file is copied to your specified destination.

NOTE: The Web Agent returns an
Invalid operation! error message if you attempt to copy one of the following:

• The current running configuration to the running configuration.
• The startup configuration to the same startup configuration.
• The specified TFTP server to a TFTP server.