Hot Swap

CAUTION:	The S8300 Media Server is NOT hot swappable and can reset the entire G700 upon insertion or removal, as well as resetting each G700 that is currently registered with it. When removing the S8300, initiate a shutdown process by first depressing the button (for 2 seconds) located next to the fourth GREEN "Ok-to-Remove" LED (specific to the S8300). This LED will first blink; then go steady. Once steady, this GREEN LED indicates that the disk drive has been parked properly and is ready to be removed. See Replacing the S8300 Media Server.

The S8300 Media Server is NOT hot swappable and can reset the entire G700 upon insertion or removal, as well as resetting each G700 that is currently registered with it. When removing the S8300, initiate a shutdown process by first depressing the button (for 2 seconds) located next to the fourth GREEN "Ok-to-Remove" LED (specific to the S8300). This LED will first blink; then go steady. Once steady, this GREEN LED indicates that the disk drive has been parked properly and is ready to be removed. See Replacing the S8300 Media Server.

CAUTION:	If you remove the S8300 before the disk is parked, you may corrupt important data. See Replacing the S8300 Media Server.

If you remove the S8300 before the disk is parked, you may corrupt important data. See Replacing the S8300 Media Server.

The Avaya Expansion Modules and Cascade Modules -- are NOT hot-swappable. They are service-disrupting and can reset the entire G700 upon insertion or removal. Power down the system prior to any insertion or removal of Avaya Expansion and Cascade modules.