Add IPSI Translations to MultiVantage Software

NOTE: The information you provide differs, depending whether the IPSIs get static addresses or they are assigned automatically through DHCP.

1. Type add ipserver-interface PNnumber and press Enter to add the IPSI circuit pack information.
2. When using static addressing, in the Host: field, type in the IP address for the IPSI in the port network listed in the Location: field.���
   
   Verify that all the other fields are populated.
3. Repeat steps 1 and 2 for each IPSI.
4. Type save translations and press Enter to save the IPSI translations to the hard drive.