Connect an Analog Station or 2-Wire Digital Station���
This example is typical of the 2-wire digital stations (2420, 64xx, 302D), 2-wire analog stations (2500), analog Central Office (CO) trunks, Direct Inward Dial (DID) trunks, and external alarms. See 2500-Type Analog Telephone Wiring.
- Choose a peripheral to connect (such as a 2-wire digital station).
- Choose the port circuit pack to use and its carrier and slot number (from Port Circuit Pack and Telephone Pin Designations). For example: TN2183 Analog Line, Cabinet 1, Carrier C, Slot 1.
- Choose a port circuit on the port circuit pack, for example port 3.
- Install cross-connect jumpers to connect the pins from the 2-wire digital station to the appropriate pins on the port circuit pack.
- Administer using Administrator's Guide for Avaya MultiVantage Software.
2500-Type Analog Telephone Wiring���
Figure notes
1 2500-Type Analog Station
|
2 TN2183 Analog Line Circuit Pack, Position 1C01
|
Port Circuit Pack and Telephone Pin Designations�����
| Pin on Modular Plug |
4-wire: 8400-Series, 606A1 |
2-wire: 302D, 8400-Series, 603E |
8510T BRI (with adjunct speaker phone) |
Analog Station, Modem |
NT1 |
| 1 |
TXT |
� |
� |
� |
� |
| 2 |
TXR |
� |
� |
T� |
� |
| 3 |
PXT |
� |
TXT |
R |
� |
| 4 |
� |
T |
PXR |
� |
T |
| 5 |
� |
R |
PXT |
No Connection 4-pin modular jack |
R |
| 6 |
PXR |
� |
TXR |
� |
| 7 |
-48VDC |
(-48VDC) |
(-48VDC) |
-48VDC |
| 8 |
GRD |
GRD |
GRD |
GRD |
| Circuit Pack |
TN754C 4-wire digital
(8 port) |
TN2181 2-wire digital (16 port)
TN2224 2-wire digital (24 port) |
TN556D ISDN-BRI line |
TN2183 Analog line (16 port) |
TN2198 2-wire BRI line |
|
PX�����PBX transmit���������T��Tip�����(A)
TX����Terminal transmit����R��Ring���(B)
|
|
|
|
