Hidden Communication Manager SAT Commands
Certain Communication Manager SAT commands have no practical use or are not supported on a G700 Media Gateway. These commands are removed from the S8300 Media Server/LSP software to prevent any misunderstanding or confusion as to what functions are supported. The S8300 Media Server/LSP runs a subset of Communication Manager code.
Table 63 through Table 65 can be read by using the column heading followed by the row element (e.g. add atm). Row elements with items in '()' are a third required part of the command (e.g. list configuration atm). The columns of these table are independent of each other. These commands may or may not require an argument.
Table 63. Disabled SAT Commands�
| add |
change |
display |
remove |
list |
| atm |
atm |
atm |
atm |
atm |
| cabinet |
cabinet |
cabinet |
cabinet |
cabinet |
| data-module |
circuit-packs |
circuit-packs |
data-module |
configuration (atm) |
| fiber-link |
data-module |
data-module |
fiber-link |
configuration (carrier) |
| ipserver-interface |
fiber-link |
fiber-link |
ipserver-interface |
configuration (port-network) |
| modem-pool |
ipserver-interface |
ipserver-interface |
modem-pool |
configuration (control) |
| pgate |
modem-pool |
modem-pool |
pgate |
data-module |
|
|
paging
(loudspeaker) |
paging
(loudspeaker) |
|
fiber-link |
|
|
pgate |
pgate |
|
ipserver-interface |
|
|
synchronization |
synchronization |
|
isdnpri-testcall |
|
|
system-parameters
(ipserver-interface) |
system-parameters
(ipserver-interface) |
|
measurement (atm) |
|
|
|
|
|
measurement (clan) |
|
|
|
|
|
measurement (modem-pool) |
|
|
|
|
|
modem-pool |
|
|
|
|
|
pgate |
Table 64. Disabled SAT Commands �
| status |
set |
reset |
busyout/release |
test |
| atm |
ipserver-interface |
disk |
atm |
card-mem |
| cabinet |
pnc |
fiber-link |
data-module |
customer-alarm |
| card-mem |
switch-node-clock |
host-adapter |
disk |
data-module |
| clan-ip |
synchronization |
interface |
ds1-facility |
disk |
| clan-port |
tdm |
ipserver-interface |
fiber-link |
environment |
| data-module |
tone-clock |
maintenance |
host-adapter |
fiber-link |
| interface |
|
packet-interface |
ipserver-interface |
hardware-group (cabinet) |
| isdnpri-testcall |
|
pnc |
modem-pool |
hardware-group (carrier) |
| packet-interface |
|
port_network |
pnc-standby |
hardware-group (pnc) |
| pgate-port |
|
tone-clock |
tdm |
host-adapter |
| pnc |
|
|
tone-clock |
interface |
| port-network |
|
|
|
isdnpri-testcall |
| switch-node |
|
|
|
led (switch-node) |
| synchronization |
|
|
|
maintenance |
| system |
|
|
|
mass-storage |
|
|
|
|
|
modem-pool |
|
|
|
|
|
network-control |
|
|
|
|
|
packet-interface |
|
|
|
|
|
pkt |
|
|
|
|
|
synchronization |
|
|
|
|
|
tdm |
|
|
|
|
|
tone-clock |
Table 65. Additional Disabled SAT Commands
| backup |
clear |
duplicate |
enable/disable |
format |
monitor |
recycle |
| disk |
interface |
data-module |
synchronization
-switch |
card-mem |
system (conn) |
carrier |
|
|
isdnpri-testcall |
|
|
disk |
|
|
|
|
pgate-port |
|
|
|
|
|
Note: In addition to the commands tabulated above, there is one other SAT command that is disabled in the case of an S8300 configured as an LSP, which is the save translations command. For an LSP, translations are received from the primary server, and there is no need to save them.
