Hi there!
We have a working solution with a CM 5.2.1 / SES 5.2.1 connected to a Ericsson MX-ONE PBX. The trunks between SES and Ericsson are configured as SIP-Trunks using TCP.
Our main problem right now is, that all connections from the SES to any other device work with TCP. But whenever a an INVITE is send from the SES to the Ericsson side, the whole communication is realized via UDP.
Unfortunately it is not possible, as far as I know, to disable UDP on either side.
Just to be clear, I'm talking about everything but the RTP-Sessions. Of course, they are supposed to be UDP and thats all fine.
What our customer just wants, is that all the communications, with the expection of the RTP-rounds, is TCP only.
I have uploaded snapshots of either configurations of both systems.
Please fill this thread with ideas/thoughts/comments. Every help is much appreciated!
Regards,
Chris
We have a working solution with a CM 5.2.1 / SES 5.2.1 connected to a Ericsson MX-ONE PBX. The trunks between SES and Ericsson are configured as SIP-Trunks using TCP.
Our main problem right now is, that all connections from the SES to any other device work with TCP. But whenever a an INVITE is send from the SES to the Ericsson side, the whole communication is realized via UDP.
Unfortunately it is not possible, as far as I know, to disable UDP on either side.
Just to be clear, I'm talking about everything but the RTP-Sessions. Of course, they are supposed to be UDP and thats all fine.
What our customer just wants, is that all the communications, with the expection of the RTP-rounds, is TCP only.
I have uploaded snapshots of either configurations of both systems.
Please fill this thread with ideas/thoughts/comments. Every help is much appreciated!
Regards,
Chris
Attached Files
.
Comment