CS1K7.6/Warm Start Reason 36 after SWD timer expiration from CheckMSecDebugMode

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • smaiyaur
    Guru
    .
    • Nov 2013
    • 107

    CS1K7.6/Warm Start Reason 36 after SWD timer expiration from CheckMSecDebugMode

    design team has created a fix patch MPLR33330

    ================ MPLR33330 ================
    Warm Start Reason 36 after SWD timer expiration from CheckMSecDebugMode.

    [0761] 09/07/2014 13:51:04 BUG7058 SWD: Swd watchdog timer expired on task tSL1 TID: 0x33e9ba0, 1 time(s), PC=0x2380901,
    PRI=240, STATUS=PEND+T edi = 0000c9d7 esi = 00000000
    ebp = 02cbb5f4 esp = 02cbb5e0 ebx = 0000c9d7 edx = 02cbb92
    4 ecx = 02cbb928 eax = 00000000 eflags = 00000246 pc = 02380901

    Return Address Stack: 019cce42 (CheckMSecDebugMode+22) 01ad58b4 (VITN_RLM_PROXY+8e4) 01ad611b (VITN_PROXY+28b)

    SETUP AND ACTIONS PERFORMED TO CAUSE THE PROBLEM:

    SIPL set Unplug its IP link then plug again
    EXPECTED RESULTS:
    1. Set reregisters ACTUAL RESULTS:
    1. INI after SWD. Issue is intermittent.

    ================ MPLR31952 ================
    Problem: DIAG005 messages being printed on the console
    ACTIONS ======= MPLR31228 written as fix to prevent a BERR from the task tVitn due to invalid pCapList
    EXPECTED RESPONSE ================= No DIAG0005
    . ACTUAL RESPONSE =============== DIAG0005 messages being printe

    d. ================ MPLR31228 ================
    Prevent a BERR0705 within task tVitn due to invalid pCapsList.
    ACTIONS ======= Unknown.
    EXPECTED RESPONSE ================= No BERRs.

    ACTUAL RESPONSE =============== BERR705 within task tVitn resulted in a loss of call processing.
Loading