Incoming calls seen as International numbers

[searlc]

Using Communicator 6.1.5 in the UK. All incoming calls show as International (have + prefix) so when returning call number is prefixed with 00. Able to work around by removing 00 in Dialling Rules "number to dial for International calls" but then when a real International call is received is unable to be redialed without inserting 00's.

[mlombardi1]

What type of trunk? The E.164 prefix is easily stripped in an SBC or SM if this is SIP.

[searlc]

Appreciate your reply however the answer was just to change the length of national numbers from 10 to 11............