.
[nortel@sr1 ~]$ csconsole
Cannot get the tty_device baud rate from serial.tmp file
Cannot get the tty_device baud rate from serial.tmp file
------------------------------------------------------------
1000e cores 6.0
If user deletes the tty that is automatically built on install or upgrade. csconsole command no longer works. cslogin will since it uses rlogin. But I need csconsole. If the cpsi port is missing and the CS is sysloaded it will not recover. Power cycle is needed.
ADAN TTY 0
CTYP CPSI
DNUM 0
PORT 0
DES DCE9600_SEBModem
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 0
BANR YES
If I build a tty on cpsi the csconsole still does not work.
Cannot get the tty_device baud rate from serial.tmp file
Cannot get the tty_device baud rate from serial.tmp file
------------------------------------------------------------
1000e cores 6.0
If user deletes the tty that is automatically built on install or upgrade. csconsole command no longer works. cslogin will since it uses rlogin. But I need csconsole. If the cpsi port is missing and the CS is sysloaded it will not recover. Power cycle is needed.
ADAN TTY 0
CTYP CPSI
DNUM 0
PORT 0
DES DCE9600_SEBModem
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 0
BANR YES
If I build a tty on cpsi the csconsole still does not work.
