G450 / mb450

[tbridg]

Hi All,

I have a G450 gateway with MB450 card. (700432495)

My questions is:

What is the default admin user / password on service port SSH?
How to possible view the licence on this card? (This card include the licence?)
With CLI command?

If the default admin password not good and the backdoor logon procedure (root/ ggdaseuaimhrke) also doesn't works it's possible the factory reset with J2003 NVRAM INIT jumper on the card?

That procedure delete the license from the card or just clear the configurations and security settings?

Thank you

Regards

Tony

[mlombardi1]

The G450 factory default username and password is root. The backdoor password only works via console and on older firmware. If you have a recent G450, it's likely the firmware on it will not support backdoor access.

Use "nvram init" to default the config. If you can't access CLI, follow the instructions on p124: https://downloads.avaya.com/css/P8/documents/100067935

The G450 isn't licensed. Pre CM 6.x could be licensed off the G450 serial number. Use "show sys" to view the serial.