ERS 4524GT and Polycom phones

[moraie]

Hi,

I am trying to configure Polycom phones on a ERS 4524gt-pwr switch.
I'm using the http://downloads.avaya.com/css/P8/documents/100123695 to guide me through that but it doen't work. The phone is booting up but gets an IP address from the data vlan.
I want to use LLDP detection.

Here are outputs of validations commands found in the document:

4524GT-PWR#show lldp med-network-policies port 1
-------------------------------------------------------------------------------
LLDP-MED network-policies
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Unit/ Application Type VlanID Tagging DSCP Priority
Port
-------------------------------------------------------------------------------
1 Voice 200 tagged 46 6
-------------------------------------------------------------------------------

4524GT-PWR#show lldp port 1 local-sys-data med
-------------------------------------------------------------------------------
LLDP local-sys-data chassis
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
ChassisId: MAC address 3c:b1:5b:8e:fc:00
SysName:
SysCap: rB / B (Supported/Enabled)
SysDescr:
Ethernet Routing Switch 4524GT-PWR HW:05 FW:5.3.0.3 SW:v5.6.1.052

MED-Device class: Network Connectivity Device
MED-POE Device Type: PSE Device
HWRev: 05 SerialNumber: LBNNTMMD5108NP
FWRev: 5.3.0.3 SWRev: v5.6.1.052
ManufName: Avaya ModelName: 4524GT-PWR
-------------------------------------------------------------------------------
LLDP local-sys-data port
-------------------------------------------------------------------------------
Port: 1

MED-Capabilities: CNLSI
MED-PSE PDPort Priority: Low Power Value: 16.0 Watt
MED-Application Type: Voice VLAN ID: 200
L2 Priority: 6 DSCP Value: 46 Tagged Vlan, Policy defined

-------------------------------------------------------------------------------
Sys capability: O-Other; R-Repeater; B-Bridge; W-WLAN accesspoint; r-Router;
T-Telephone; D-DOCSIS cable device; S-Station only.
Med Capabilities-C: N-Network Policy; L-Location Identification; I-Inventory;
S-Extended Power via MDI - PSE; D-Extended Power via MDI - PD.


4524GT-PWR#show lldp port 1 neighbor detail
-------------------------------------------------------------------------------
LLDP neighbor
-------------------------------------------------------------------------------
Port: 1 Index: 5 Time: 0 days, 00:21:55
ChassisId: Network address IPv4 0.0.0.0
PortId: MAC address 00:04:f2:23:64:05
SysName: Polycom SoundPoint IP 331
SysCap: TB / T (Supported/Enabled)
PortDesc: 1
SysDescr:
Polycom;SoundPointIP-SPIP_331;2345-12365-001,1;BR/4.2.2.0710/24-Feb-10 16:38;

PVID: PPVID Supported: none
VLAN Name List: none PPVID Enabled: none

Dot3-MAC/PHY Auto-neg: supported/enabled OperMAUtype: 100BaseTXFD
PMD auto-neg: 10Base(T, TFD), 100Base(TX, TXFD)

MED-Capabilities: CNDI / CNDI (Supported/Current)
MED-Device type: Endpoint Class 3
MED-Application Type: Voice VLAN ID: 0 (Priority Tagged)
L2 Priority: 0 DSCP Value: 0 Untagged Vlan, Policy unknown
Med-Power Type: PD Device Power Source: PSE and Local
Power Priority: Unknown Power Value: 4.5 Watt
HWRev: 2345-12365-001,1 FWRev: BR/4.2.2.0710/24-Feb-10 16:38
SWRev: SerialNumber: 0004f2236405
ManufName: Polycom ModelName: SoundPointIP-SPIP_331
AssetID:
-------------------------------------------------------------------------------
Sys capability: O-Other; R-Repeater; B-Bridge; W-WLAN accesspoint; r-Router;
T-Telephone; D-DOCSIS cable device; S-Station only.
Total neighbors: 1
Med Capabilities-C: N-Network Policy; L-Location Identification; I-Inventory;
S-Extended Power via MDI - PSE; D-Extended Power via MDI - PD.


I am missing something for sure but I can't find what.

Thanks.

[jfafinski]

Hi,
If it can help you, this is Working with Aastra ip phones:



interface FastEthernet ALL
lldp tx-tlv port 3-11 dot3 mac-phy-config-status
exit
!
! *** 802.1ab vendor-specific Avaya TLVs config ***
!
!
! *** 802.1AB MED Voice Network Policies ***
!
interface FastEthernet ALL
lldp med-network-policies port 3-11 voice dscp 46 priority 6 tagging tagged vlan-id 805
exit


in this example vlan 805 Voice and vlan 1002 Data