WSS2361 Firmware Upgrade

[davie4]

Hi all,

I just treid to upgrade the firmware of my WSS2361 from v6.0.4.6.0 to v7.3.6.5 via the webview. It said that it successfully completed but as I was watching the WSS bootup it popped up with the following error...

Compact Flash load from boot1:default matches N6073605.REL
load_compact_flash: Filesize 0x00b90079 exceeds buffer length 0x00a00000.

It then preceeded to bootup with the older firmware.

Is this a known issue with the latest firmware? or is there something I need to perform for it to succeed? Any info. would be appreciated.

[alkurdi1978]

Dear davie4

fro upgrade use tftp not web i have try it but it dont work
i have try it using tftp and it work
but first go in step 6.0 to 7.0 to 7.1 to 7.3 it recommended from avaya
but fro 7.3 i do not try it ( but i think it work fine because it tested by trapeze (juniper) )

i will post the step for upgrade soon
best regards

[davie4]

Hi alkurdi1978,

Thank you for your reply. I did manage to upgrade the firmware successfully via the webgui once I upgraded to each version of the firmware as you stated, there is not direct route from 6 -> 7.3 I can confirm that 7.3 seems stable and is working well for me.

Thanks again.