Nortel Contivity SSL VPN

[jlocks]

Hi all,

I'm trying to get my feet wet with this box. We're migrating over to Juniper boxes. Does anyone know where the configuration is in order to specify the public address vip which is used by clients from the outside to connect to the box for ssl vpn services? Where do you configure the IP pools which are used to districute to clients once a connection is established?

System Identity - Management IP - Is this the management port IP assignment on the box for internal management?

Services - SSL VPN - SSL VPN Management and SSL VPN Interface - What IPs are these for? I'm assuming the SSL VPN Interface is what connects to the LAN therefore is given a LAN IP address, along with the management. Where do the public/external addresses and ports configure?

Is there any diagrams of docs which display a test scenario which also illustrates the ip settings and network configs?

Ive been reading the below resource.

https://downloads.avaya.com/css/P8/documents/100105604

Thanks all

[jlocks]

no one....?

[rameshng]

I think you are referring to the right document for the SSL VPN configuration part. In addition to that VPN configuration, below doc will help you to set up the interfaces part as well.
this clearly mentions about the management IP, interface IP etc.

https://downloads.avaya.com/css/P8/documents/100104887

I couldn't find anything where you have an example and illustrate the respective configuration. I dont think Avaya gives such example for these devices.