Avaya Switch Internet Configuration

[ferra64]

Hi everybody, I'm new here, my company started working with Avaya products ( I still don't have a Sold To associated ), but we already start installing more than 12 switches and Avaya phones in a client.

So my problem is:

We started to create a stack with 5 switches.
Switch IP 192.168.1.1
Mask 255.255.255.0
Default Gateway 0.0.0.0
Stack IP 192.168.1.2
We created 2 vlans in stack:
vlan DATA 192.168.10.1
vlan PHONES 192.168.10.2

the vlans are working ( I can connect two devices in vlan DATA and ping between it)

after that we connected a cable from internet provider (modem) directly to the base switch in port 1 (default vlan).

The provider modem information is:
static ip 182.97.10.60
mask 255.255.255.248
gateway 182.97.10.51

what configuration should I do to have internet in my switch?
(Note, I want internet all across default vlan and DATA and PHONE vlan)

Best regards, and thanks for your help in advance...
Antonio Ferrao

[sprigent]

Hi Antonio
I'm surprised with the elements you send.You can not have the same subnet for 2 differents vlan.What you have to do is to activate ip routing on 1 stack (others have to stay on L2 switching)
Vlan data (eg vlan1)192.168.10.1/24 (it will be management address for the stack)
vlan voice (eg vlan 2)192.168.20.1/24
vlan internet (eg vlan 3) 182.97.10.61/29

pc have 192.168.10.1 as default GW,phones have 192.168.20.1 as default GW
add on switch ip route 0.0.0.0 via 182.97.10.60 (if it's your provider router lan ip